May be is a dumb question but I have hard time identifing the value of this capacitors. capacitors are labled:
100V
K
0532

I ignored the last line (0532) so I think is a 10pF cap with 10% tolerance but I'm not sure, the letter V confuce me. Can someone help me with this?

 

I would say more likely 100pF. It looks old, prior to widespread use of the two digit plus multiplier marking. And too big to be 10pF.

What type of circuit is it? That could be a clue.

 

I would say more likely 100pF. It looks old, prior to widespread use of the two digit plus multiplier marking. And too big to be 10pF.

What type of circuit is it? That could be a clue.

Hi
Thanks for the help and sorry for the late reply. The circuit is a logic board. The caps are connected to the VCC of each SN74xxxx and AM26SLxxx IC's. But looking at the Data sheet of those IC's shows that a 100pF cap are recomended for noise rejection.

Thanks again for the help