Hello Again, Another Fun Surprise from our instructor without any lectures on the subject, we get this lab assignment.

I have to creat a circuit that will cover the following :

1 Edwards 6616 Fire Alarm Panel
1 Manual Pull station
1 Rate of rise temperature station
1 Alarm signaling device

misc. conduit system, we pick our path and location of each device.

We need to design and instal a working Single Stage, One Zone fire alram system. I manual pull station, 1 rate or rise temperature detector and 1 alarm signaling device. Our power is already at each lab station. And the initiating and signal circuits are to be terminated by end of the line resistors located at the terminal strip.

I NEED the Ladder Diagram showing the Rung numbers and wire numbers for this working circuit as well as a Timing Diagram PLEASE, SOON.

Thanks Again In Advance, George

 

You may have skipped a step:

PLEASE READ - Posting Questions in the Homework Help Forum
Important

The Homework Help Forum is not a free homework service; we are here to help your understanding, but fully expect the users of this forum to dictate the course of their own learning.

When posting a request for homework/coursework/assignment help, you must provide details of your attempts at the questions. Any thread that just posts up a copy of the questions without any attempts on the part of the opening poster will be directed to this thread and will be given 48 hours to satisfy the requirements detailed within. Help us, help you.