hi, iam building a winax based transceiver which based on the 802.16-2004 standard i wanna send 35 byte or 280 bit per time and iam using a convolutional coding in the system which accept only 96 bit per time so i have to send it 3 times 96 bit each time and i will pad zeros in the third time cause i will have only 88 bit to send (280 = 96 + 96 + 88) but the problem is how to assembly then again in the receiver and that what iam asking for how to know that decoder has finished of 96 bit to store then and to be ready to store the second group and so on
iam attaching here the project files the simulink and the initialization m file
iam attaching here the project files the simulink and the initialization m file
Attachments
-
11.2 KB Views: 7