Hi, I am completely new to electronics and am attempting to build my first amplifier from a circuit diagram and parts list I was given. I ordered all of the components from Digikey and have gone through and checked them against the circuit diagram. I have 2 that I am unsure of. I should have

C10 = 100nF
and
C3 = 10nF

What I have are the two caps in the attached image, can anyone please tell me if they are correct and if so which is which or have I got the wrong thing?

Thanks in advance

 

The label on the top bag identifies the capacitor as being 10000 pF, or 10 nF. The bottom bag is marked 0.1 uF, which is 100 nF. So the capacitor in the top bag should be C3, and the one in the bottom bag should be C10.

 

The label on the top bag identifies the capacitor as being 10000 pF, or 10 nF. The bottom bag is marked 0.1 uF, which is 100 nF. So the capacitor in the top bag should be C3, and the one in the bottom bag should be C10.

Thank you so much. As I though but wasn't absolutely sure. I can get the soldering iron out now!