Working on an old mobo by HP.
And I can’t place this component next to the DIMM slots. Says RN265.
Looks halfway de-soldered.

The resistor next to it looks fine, measured 10 ohm. Anyone know what this RN265 component is called?

 

They appear to be 4 in one resistor network, ?

 

Probably a 4x10Ohm resistor network.

 

Looks suspiciously like a Yageo YC164 resistor pack. 100 would be, as described above, 10 ohm (10 x 10^0)

 

Thank you guys.
Yes it’s a 10 ohm resistor network. im going to resolder it back on the board hopefully it works.

thank you again for the Replies