I'm looking for an extruded heatsink like the one in this image.
It has a row of 8x TO-220 devices attached via a clip system. The width is around 41mm, and the height from the (separate) cylindrical attachments is 26mm.
The current piece has been cut to 96mm to fit within a DIN rail mounted Phoenix enclosure, but I'm happy to buy longer pieces as I can cut/machine to length. Colour is not important either.

 

Hi fb,
Any type on this link
suitable for your application.?
E
https://www.google.com/search?q=8+f...30DXsQ_AUoAXoECAEQAw&biw=1147&bih=635&dpr=1.4

 

Hi fb,
Any type on this link
suitable for your application.?
E
https://www.google.com/search?q=8+f...30DXsQ_AUoAXoECAEQAw&biw=1147&bih=635&dpr=1.4

I did the google search and drew a blank. It's the groove for the clip that is the puzzle I'm trying to solve.
Otherwise I'm going to have to do a redesign.