Hello all,
I have a problem with Tamson TV 7000 temperature controlled bath in the laboratory. When the device starts on working at 20 C, after 30 minutes H1 out of order error occurs on readout. If I just push one of the buttons (arrows), it starts working again. I just checked if this is an error between the heater and the relay on the power board. If this problem is really caused by the power board and communication to the microprocessor board, what is your suggestion for me to search about? Thank you in advance.
Gokce
I have a problem with Tamson TV 7000 temperature controlled bath in the laboratory. When the device starts on working at 20 C, after 30 minutes H1 out of order error occurs on readout. If I just push one of the buttons (arrows), it starts working again. I just checked if this is an error between the heater and the relay on the power board. If this problem is really caused by the power board and communication to the microprocessor board, what is your suggestion for me to search about? Thank you in advance.
Gokce