Gear selector module help

Thread Starter

Allaboutautos

Joined Dec 15, 2017
7
Working on a Mercedes-Benz. Need to wire two modules into a single harness. One needs to work at startup and the other running. There are eight wires going into each module.
 

Thread Starter

Allaboutautos

Joined Dec 15, 2017
7
ythe other 3 are not used.ear make model
module names and or descriptions

Can you put the question in the form of a question?
My apologies. I should have known to not be so vague.
OK. The wires are 12+, 12- a wire to diagnostic port, can/bus high, can/bus low

The other 3 are not used.

The circuit is electronic gear shift selector
 
Last edited by a moderator:
Top