Hello everyone!
I'm about to start a little project that has to be consist of hardware components only without using any programming language (can not include programmable devices/microcontroller).
The project's purpose is to imagine a system that checks a car battery, one circuit needs to measure the battery output voltage and whether it's out of a known range (let's say 12 to 12.7V) then the system needs to operate an indicator (LED/BUZZER).
Second circuit of the system needs to measure leakage current from the battery and if it's value is over than 50mA, also operate an indicator.
Also, I want to display the voltage/current values on a 7-segment display using ADC + suitable device to convert the binary output from ADC into BCD number so that the 7-segment decoder will be able to work with it, but I can't find an appropriate device to do so in Multisim.
Any help with choosing relevant devices and other ideas to start the project will be great for me!
Thank you all in advance!
I'm about to start a little project that has to be consist of hardware components only without using any programming language (can not include programmable devices/microcontroller).
The project's purpose is to imagine a system that checks a car battery, one circuit needs to measure the battery output voltage and whether it's out of a known range (let's say 12 to 12.7V) then the system needs to operate an indicator (LED/BUZZER).
Second circuit of the system needs to measure leakage current from the battery and if it's value is over than 50mA, also operate an indicator.
Also, I want to display the voltage/current values on a 7-segment display using ADC + suitable device to convert the binary output from ADC into BCD number so that the 7-segment decoder will be able to work with it, but I can't find an appropriate device to do so in Multisim.
Any help with choosing relevant devices and other ideas to start the project will be great for me!
Thank you all in advance!