Hi J and J2,
I just disconnected the wire from the MISO on the COMP.
The MOSI shows 2.64V
The MISO shows 0V.
There is a shadow at the disconnected PIC MOSI end, so I will re-wire the COMP again, and re-check.
When I originally connected the COMP VID to VDD, I must have read the D/S carefully, and seen what you both say that the MISO should be at 2.54V. {I also had advice from another person on this forum, that I don't remember the name, sorry)
Thanks.
C
I just disconnected the wire from the MISO on the COMP.
The MOSI shows 2.64V
The MISO shows 0V.
There is a shadow at the disconnected PIC MOSI end, so I will re-wire the COMP again, and re-check.
When I originally connected the COMP VID to VDD, I must have read the D/S carefully, and seen what you both say that the MISO should be at 2.54V. {I also had advice from another person on this forum, that I don't remember the name, sorry)
Thanks.
C