Error compiling for board Arduino/Genuino Uno.

Thread Starter

mkbutan

Joined Sep 30, 2008
299
Hi,
please any one help me to resolve my problum
Iam having 3 Arduino boards non is working and giving the following ERROR

Cannot create temporary file in C:\Users\mkbutan\AppData\Local\Temp\: Permission denied

exit status 3
Error compiling for board Arduino/Genuino Uno.
Arduino Uno 328p

I have installed Arduino 1.8.5 IDE on my New Laptop
Lenovo ideapad 320
i-3 ; 8GB RAM ; 2TB HDD
Win-10 (64Bits)

It was working before on my Desktop
Win-7(32Bits)
 

Thread Starter

mkbutan

Joined Sep 30, 2008
299
Assembler messages:

Fatal error: can't create core\wiring_pulse.S.o: Permission denied

exit status 1
Error compiling for board Arduino/Genuino Uno.

open sketch\Blink.ino.cpp: Access is denied.
Error compiling for board Arduino/Genuino Uno.
Assembler messages:

Fatal error: can't create core\PluggableUSB.cpp.o: Permission denied

exit status 1
Error compiling for board Arduino/Genuino Uno.
Quick Heal Total Security is Disabled and still this EROOR

C:\Users\mkbutan\Documents\ArduinoData\packages\arduino\hardware\avr\1.6.21\cores\arduino\WInterrupts.c:1:0: fatal error: can't open C:\Users\mkbutan\AppData\Local\Temp\ccdJH3IS.s for writing: Permission denied

/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */

^

compilation terminated.

exit status 1
Error compiling for board Arduino/Genuino Uno.

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.

Cannot create temporary file in C:\Users\MKButan\AppData\Local\Temp\: Permission denied

exit status 3
Error compiling for board Arduino Duemilanove or Diecimila.


Build options changed, rebuilding all
C:\Users\MKButan\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cores\arduino\hooks.c:1:0: fatal error: can't open C:\Users\MKButan\AppData\Local\Temp\ccjHKI6T.s for writing: Permission denied

/*

^

compilation terminated.

exit status 1
Error compiling for board Arduino/Genuino Uno.

These are the ERRORs with the ARDUINO IDE

Please help me to rectify the problem ...
I think its an Win 10 Issue
 

danadak

Joined Mar 10, 2018
4,057
If you right click the project folder, "properties", "security" and make sure
users have full permissions checked off. Do his as an admin.



There is also this -

Regards, Dana.
 
Last edited:

Thread Starter

mkbutan

Joined Sep 30, 2008
299
If you right click the project folder, "properties", "security" and make sure
users have full permissions checked off. Do his as an admin.



There is also this -

Regards, Dana.
Thanks dear for guiding me...
but there is already have full Control perdition...
but still iam getting this Error
cc1plus.exe: fatal error: opening output file preproc\ctags_target_for_gcc_minus_e.cpp: Permission denied
compilation terminated.
exit status 1
Error compiling for board Arduino/Genuino Uno.
Arduino: 1.8.6 Hourly Build 2018/05/15 10:41 (Windows 10), Board: "Arduino/Genuino Uno"
cc1plus.exe: fatal error: opening output file preproc\ctags_target_for_gcc_minus_e.cpp: Permission denied
compilation terminated.
exit status 1
Error compiling for board Arduino/Genuino Uno.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
 

danadak

Joined Mar 10, 2018
4,057
Temporarily go to Windows Setting, users, and in your user account turn off accountcontrol.

Then turn it back on when done.

Ther are some windows permission utilties out there to create specific program exceptions.

Regards, Dana
 

be80be

Joined Jul 5, 2008
2,072
It's not you that has the problem it's the arduino ide just run it as admin

On a side note you should of been ask to install the arduino for all users
i bet it didn't get set right I never had a problem on windows 10

I use the stand alone install that let's you put everything in your home folder.
 

Thread Starter

mkbutan

Joined Sep 30, 2008
299
Thanks its working now
but as it was auto defined all the setting in win 32 it should be same in win 64
 
Top