The am26ls32ac (http://www.ti.com/lit/ds/symlink/am26ls32ac.pdf) differential receiver IC includes two pins, G and G (Complement) which appear to have some effect on the output of each receiver.
The description on page 11 is not entirely clear to me, so I'll just explain what I need:
Two receivers will be used to process a TTL encoder's differential input. The output, which should always be enabled, should provide TTL-logic level outputs to the receiving MCU. Can I just provide G with 5v, and connect G (Complement) to ground? Do the output pins need to be connected to G/G(complement)? What exactly is the purpose - a few example may help illustrate this?
The description on page 11 is not entirely clear to me, so I'll just explain what I need:
Two receivers will be used to process a TTL encoder's differential input. The output, which should always be enabled, should provide TTL-logic level outputs to the receiving MCU. Can I just provide G with 5v, and connect G (Complement) to ground? Do the output pins need to be connected to G/G(complement)? What exactly is the purpose - a few example may help illustrate this?