I'm building a Part 15 AM tube transmitter that has two transformers in the power supply circuit.
My questions are with regard to the placement of these transformers and the proximity with one another. Are there some general guidelines or best practices I should be following? My current design layout on the board has them about 2 inches apart but can they be closer or is that not a good idea?
The main one has its primary connected to the AC line.
Thanks for any advice.
-Dave
My questions are with regard to the placement of these transformers and the proximity with one another. Are there some general guidelines or best practices I should be following? My current design layout on the board has them about 2 inches apart but can they be closer or is that not a good idea?
The main one has its primary connected to the AC line.
Thanks for any advice.
-Dave