Hi everyone,
New here and i'm glad I found this forum!
I have a basic understanding or simple electronics and my knowledge is a little rusty but i'm willing to learn.
I have a DKN Treadmill, It shows Error 'E06' after startup. A little research says its related too Incline.
The manufacturer third party says its a replacement board straight away at a very hefty price tag! So, I thought I would take on the challange.
I have powered up the motor and it works perfectly, when just disconnecting the motor from the MCB, i get a different error as well 'E02' so that would rule out the motor side. When i disconnect the incline, I still get the 'E06'. But there is a micro test button called 'Lift Self' and when pressed the Incline works perfectly, so I also know its not the incline.
It has no seperate speed sensor.
Has to be a board issue, nothing looks out of place or burnt and caps look great. It's only 2 years old.
But I can not find anything related schematic wise to this board and there is not alot on it. I did manage to find the board on the usual place 'Aliexpress'.
Its a 'MKS TMPB25-P' board https://www.aliexpress.com/item/4000132861538.html and by the looks, it's also a Pukido Power Supply Board for Brother BR-3016 Treadmill.
Does anyone know anything on this type of board as I can not find anything else about it?
The big caps look sound, I guess the logical thing to do first is to test the Bridge Rectifier and the two IGBT's, there also seems to be a slightly different rectifier as well. Are these best tested off the board as have heard of conflicting advice?
Any other pointers would be great and thank you.
New here and i'm glad I found this forum!
I have a basic understanding or simple electronics and my knowledge is a little rusty but i'm willing to learn.
I have a DKN Treadmill, It shows Error 'E06' after startup. A little research says its related too Incline.
The manufacturer third party says its a replacement board straight away at a very hefty price tag! So, I thought I would take on the challange.
I have powered up the motor and it works perfectly, when just disconnecting the motor from the MCB, i get a different error as well 'E02' so that would rule out the motor side. When i disconnect the incline, I still get the 'E06'. But there is a micro test button called 'Lift Self' and when pressed the Incline works perfectly, so I also know its not the incline.
It has no seperate speed sensor.
Has to be a board issue, nothing looks out of place or burnt and caps look great. It's only 2 years old.
But I can not find anything related schematic wise to this board and there is not alot on it. I did manage to find the board on the usual place 'Aliexpress'.
Its a 'MKS TMPB25-P' board https://www.aliexpress.com/item/4000132861538.html and by the looks, it's also a Pukido Power Supply Board for Brother BR-3016 Treadmill.
Does anyone know anything on this type of board as I can not find anything else about it?
The big caps look sound, I guess the logical thing to do first is to test the Bridge Rectifier and the two IGBT's, there also seems to be a slightly different rectifier as well. Are these best tested off the board as have heard of conflicting advice?
Any other pointers would be great and thank you.