Hi guys
I am trying to reconnect a transformer to a 3 phase circuit breaker but I am slightly confused as to how to reconnect it
I foolishly didn't observe the wiring before I disconnected it. I have attached a drawing of the particular piece I am unsure of. There are 2 phases coming out of the 3 phase overload circuit breaker but I do not know where I should connect them in reference to the drawing. Do these need to be connected into the primary side of the transformer? I am getting 230vac between each phase and ground. Does the drawing represent the connections on the primary side or the secondary side?
I am trying to reconnect a transformer to a 3 phase circuit breaker but I am slightly confused as to how to reconnect it
I foolishly didn't observe the wiring before I disconnected it. I have attached a drawing of the particular piece I am unsure of. There are 2 phases coming out of the 3 phase overload circuit breaker but I do not know where I should connect them in reference to the drawing. Do these need to be connected into the primary side of the transformer? I am getting 230vac between each phase and ground. Does the drawing represent the connections on the primary side or the secondary side?
Attachments
-
79 KB Views: 19