I am trying to connect my nanoboard 3000 with Spartan 3AN to Impact. I have added the correct .bsd file and used a Xilinx Platform Cable - I have connected my JTAG wires to the soft side of the system jtag header -
The VCC pin is at 2v5 - and the light on the platform cable is green.
But in impact when I try to get device id or anything really I get errors - the bit patterns that come as outputs for the id always change for example (obviously reading garbage)
I am running Arch Linux with Xilinx ISE 14.7 and with the usb drivers: git://git.zerfleddert.de/usb-driver
Does anybody know a way to connect the board to Impact?
Thanks for any help!
Mod: Downloaded the linked PDF's
The VCC pin is at 2v5 - and the light on the platform cable is green.
But in impact when I try to get device id or anything really I get errors - the bit patterns that come as outputs for the id always change for example (obviously reading garbage)
I am running Arch Linux with Xilinx ISE 14.7 and with the usb drivers: git://git.zerfleddert.de/usb-driver
Does anybody know a way to connect the board to Impact?
Thanks for any help!
Mod: Downloaded the linked PDF's
Attachments
-
8.7 MB Views: 0
-
1.1 MB Views: 1
Last edited by a moderator: