Connecting DPDT relay to two different solenoid valves

Thread Starter

pr123

Joined Mar 13, 2015
30
Hi,
I am trying to trigger/switch two Solenoid valves (24VDC) with only one DPDT relay (24VDC) is that possible and can anyone help me with its circuit diagram? relay is Omron make with base.

Thank you
 

MaxHeadRoom

Joined Jul 18, 2013
28,619
You use a N.O. contact on each of the DPDT contacts to switch the solenoids individually.
The coil is energized by the system you are using, a reverse connected diode should be used across the coil of the relay and also across each solenoid, particularly if there is electronics present.
Max.
 
Top