Component Identification needed

Thread Starter

Mr Determined

Joined Jul 8, 2019
7
Hi Guys.
I received a replacement mainboard for my solar inverter yesterday. When I picked it up out of the box, a component fell off. I am no expert but I believe it is a capacitor of some description. Everywhere else I have tried to get info from has no clue on it. I am just constantly hitting a brick wall with this. Any help is appreciated.The pics below show the piece I need and it's relative position on the board. Thanks in advance. bit on board.jpg 03.jpg 01.jpg
 

ericgibbs

Joined Jan 29, 2010
8,729
hi,
If it came off that PCB, then it should be obvious where it is supposed to be, say a printed area with two wire stubs sticking up.

I suspect that its an odd component thats dropped into the box during packing at the manufacturer.

Is that photo showing all the PCB area.?

E
 

Thread Starter

Mr Determined

Joined Jul 8, 2019
7
My guess is it is a 10μF 350VAC non-polarized capacitor.
Thanks for that.
hi,
If it came off that PCB, then it should be obvious where it is supposed to be, say a printed area with two wire stubs sticking up.

I suspect that its an odd component thats dropped into the box during packing at the manufacturer.

Is that photo showing all the PCB area.?

E
Hi.
That's where it was when it fell off the board. The wire stubs were on the board as per pic below. Just looking for a replacement to solder in and get rocking.
 

Attachments

Thread Starter

Mr Determined

Joined Jul 8, 2019
7
Going off the suggestions here, I have found this. Can anyone tell me whether this will work as a replacement? Please be kind as I have openly admitted I am no expert, just trying to do what I can with the little time/funds I have. TIAebay cap.jpg
 

Thread Starter

Mr Determined

Joined Jul 8, 2019
7
Thanks Eric .Appreciated. Will report back in a few days with result. Either I'll be grinning or crying lol
 

Thread Starter

Mr Determined

Joined Jul 8, 2019
7
Hi Guys. Reporting as promised(albeit a bit late). I am pleased to say that the cap was indeed the right one. Thank you to all that replied. Your input is much appreciated. HAVE A GREAT DAY!
 
Top