Hello,
I am designing an automation solution where I have 40 Electrical valve acuators to connect my PLC. I am considering two types of actuators with different communication technology.
Solution 1: Modbus TCP/IP
Solution 2: DeviceNET, Profibus DP and Profinet (Not quite familiar with this)
These 40 actuators are spreaded across the plant with various distance and problem here is the unknown distance. What PLC and communication protocol should I be using to design this?
Please share your thoughts.
Thanks in advanc,
I am designing an automation solution where I have 40 Electrical valve acuators to connect my PLC. I am considering two types of actuators with different communication technology.
Solution 1: Modbus TCP/IP
Solution 2: DeviceNET, Profibus DP and Profinet (Not quite familiar with this)
These 40 actuators are spreaded across the plant with various distance and problem here is the unknown distance. What PLC and communication protocol should I be using to design this?
Please share your thoughts.
Thanks in advanc,