I was using a cameras flash circuit to charge my capacitors which would take about 1 min so i had and extra "bug zapper:" hand held. I removed the racket part exposing the negative and positive i used my multimeter to see how much volts the out put was. it pin my meter with a tap of the button. It was set on 500v 'DC'. I hooked up the "zapper" to my 330 v capacitor bank and my multimeter to measure the voltage. i taped the button on the "zapper" but the meter didn't move i checked all my connections but it still wont charge....

PLEASE HELP

 

Once again, rule 2 comes in:

Forum members must not knowingly provide any information that may adversely affect another member; this includes, but is not restricted to, information that may potentially result in injury, death, damage or destruction of property and possessions. The administration takes this matter seriously and has the right to remove any contentious content and deal with the offending member as it deems is necessary.