Boost or cuk convertor

Thread Starter

naumandar

Joined Jan 19, 2009
8
Hey i want to design the Dc/Dc Convertor from 12V to 19.5V with 3.5Amp, i hav studied about SMPS(Swithing mode power supplies) and found Boost convertor and Cuk convertor, will u ppl help me and giude me that how will i gain the 3.5 amp current, which ic is useful...

Thank u So much in advance
 

mik3

Joined Feb 4, 2008
4,843
I have never used one of these chips and didn't read the datasheet, however, I believe that you can increase the output current by using a more powerful MOS.
 

SgtWookie

Joined Jul 17, 2007
22,230
Go to: http://www.national.com
On the upper right, enter your parameters: 10 to 15 volts input, 19.5 volts output, 3.5 amps output. Start the design. Use the Flash-based webbench.

The LM3478 with associated components can give you a boost converter better than 90% efficient.
 
Top