I have been assigned a group project, unfortunately my group members don't really do anything, so its up to me to try to figure things out. The project discription is: It must have a counter that counts up to 9 then switches direction and counts from 9 to 1. After the count the counter shuts off.
The display is a 7 seg. display.
I already know I will need a 74192 up/down counter and a 7447 driver/decoder, but I am confused on how to actually get the counter to cycle through the whole process and stop at the end automatically.
Any Help would be apprieciated.
Thanks
The display is a 7 seg. display.
I already know I will need a 74192 up/down counter and a 7447 driver/decoder, but I am confused on how to actually get the counter to cycle through the whole process and stop at the end automatically.
Any Help would be apprieciated.
Thanks