Hello Friends,
I had decided to design PCB board by Using UV exposure method and first I decided to do design process as mentioned below
Layout Printout in OHP sheet – apply enamel paint on copper clad board for photo resistant (Reference) - Screen Printing using UV Exposure - Developing using SODIUM METASILICATE PENTAHYDRATE – Etching using FERROUS CHLORIDE(FeCl2) – Plating using TIN LIQUID – Solder Masking using Solder Mask Paste, brought from eBay (Reference) – Drilling – Components Placing – Conformal Coating
After that I referred many tutorials and videos, in that they had done all above process, but not in above sequence. Now please write me, weather above sequence is best sequence, or any other sequence that gives best results.
Thanks in Advance
Regards,
Parthasarathi
I had decided to design PCB board by Using UV exposure method and first I decided to do design process as mentioned below
Layout Printout in OHP sheet – apply enamel paint on copper clad board for photo resistant (Reference) - Screen Printing using UV Exposure - Developing using SODIUM METASILICATE PENTAHYDRATE – Etching using FERROUS CHLORIDE(FeCl2) – Plating using TIN LIQUID – Solder Masking using Solder Mask Paste, brought from eBay (Reference) – Drilling – Components Placing – Conformal Coating
After that I referred many tutorials and videos, in that they had done all above process, but not in above sequence. Now please write me, weather above sequence is best sequence, or any other sequence that gives best results.
Thanks in Advance
Regards,
Parthasarathi