Hi,
I am using a YoctoWatt to measure voltage and current, and I am having problems with the connection. The screenshot from the user manual of YoctoWatt is all the information needed to build and test the connection, I think
I built a simple testing circuit but it's not working for me. When the YoctoWatt isn't connected, I get 1.2V over the resistor and 1.7V over the LED. But when I connect the YoctoWatt, using a multimeter I get 0V for both; the LED isn't on.
Wondering what the problem is. Am I connecting it wrong?
Thanks in advance!
I am using a YoctoWatt to measure voltage and current, and I am having problems with the connection. The screenshot from the user manual of YoctoWatt is all the information needed to build and test the connection, I think
I built a simple testing circuit but it's not working for me. When the YoctoWatt isn't connected, I get 1.2V over the resistor and 1.7V over the LED. But when I connect the YoctoWatt, using a multimeter I get 0V for both; the LED isn't on.
Wondering what the problem is. Am I connecting it wrong?
Thanks in advance!
Attachments
-
67.4 KB Views: 11
-
269 KB Views: 9