as seen in picture below, when i hook up the oscilloscope to outA and gnd, I can get about 1Hz, but when I connect it to OutB, I somehow get a Sine wave, what could be wrong? I am guessing one of the NAND gate is tossed?
I should get a 22kHz square + 1HZ square wave on OutB.
note: In is always high, and the OutA on the second one should be labeled OutB
I should get a 22kHz square + 1HZ square wave on OutB.
note: In is always high, and the OutA on the second one should be labeled OutB