Hello I have an antenna amplifier pcb shown here I was wondering if anyone cna tell me what components are missing and how I would identify them to get replacements any help would be appreciated

 

Did this take a lightining strike, if so there is a lot more damaged
that what you denote. The tiny part is most likely either a R or a C.

The larger part looks like a coil/inductor.

If you can get a schematic you may be able to ID the actual parts and their
numbers.


Regards, Dana.

 

Hello,

It looks like one chip has a blown top and an other seems to have a crack in it:



Bertus

 

Did this take a lightining strike, if so there is a lot more damaged
that what you denote. The tiny part is most likely either a R or a C.

The larger part looks like a coil/inductor.

If you can get a schematic you may be able to ID the actual parts and their
numbers.


Regards, Dana.

Hello thanks for. Your reply that big chip actually is. Not how it looks lol its just some sort of silicone putty that was inside the board and it's just some residue left over apologises for my lack of information in my post but thanks for your help

 

Hello,

It looks like one chip has a blown top and an other seems to have a crack in it:

View attachment 184366

Bertus

Hello thanks for your reply, them. Two components are not as bad as they look there was somesl sort of silicone putty over them and the left over residue makes them look like that