here is the pic

 

This what you you used
avrisp.name=AVR ISP
avrisp.communication=serial
avrisp.protocol=stk500v1
avrisp.program.tool=avrdude
avrisp.program.protocol=stk500v1
avrisp.program.tool=avrdude
avrisp.program.extra_params=-P{serial.port}

 

but the more i think about it under example then audionisp there is no other option?

 

as per web page

https://www.digikey.com/en/maker/tu...lash-the-arduino-bootloader-to-an-attiny85-ic

under:
Turn the Arduino UNO into an ISP

 

# STK500 firmware version v1 and v2 use different serial protocols.
# Using the 'stk500' protocol tells avrdude to try and autodetect the
# firmware version. If this leads to problems, we might need to add
# stk500v1 and stk500v2 entries to allow explicitly selecting the
# firmware version.

 

You on two roads here one is loading the code to turn your arduino into a programmer




Thats this one

And one that burns the bootloader thats after you load the
ArduinoISP code I posted

 

You on two roads here one is loading the code to turn your arduino into a programmer
View attachment 328961



Thats this one

And one that burns the bootloader thats after you load the
ArduinoISP code I posted

well i was following the steps on that web site. so how can i fix it? even with the code you posted before i still had the same error

 

What I don't understand, all the website I was reading all say the same thing for a step.

 

All the websites are just posting to run Adds on there page the stuff they post is for older arduino ide and half dont work with arduino ide 2.3.2

Get your information from here https://www.arduino.cc/

 

All the websites are just posting to run Adds on there page the stuff they post is for older arduino ide and half dont work with arduino ide 2.3.2

Get your information from here https://www.arduino.cc/

ahh ok i will check it out. any idea on how to fix it?

 

Look like their page saids the same thing:

https://docs.arduino.cc/built-in-examples/arduino-isp/ArduinoISP/

 

https://www.rickety.us/2010/03/arduino-avr-high-voltage-serial-programmer/
that fix the 85 that you burned fuse wrong and brick them

 

In case you are wondering, this is why people told you to use an Arduino board instead of a raw AVR chip.

 

https://www.rickety.us/2010/03/arduino-avr-high-voltage-serial-programmer/
that fix the 85 that you burned fuse wrong and brick them

ok any idea on how to fix the other problem?

 

In case you are wondering, this is why people told you to use an Arduino board instead of a raw AVR chip.

yes but it looks like 1,000's of people have programmed the raw chip without problems and there is nothing i can find on the web about this problem which is weird. It just don't make sense, I am not sure what to think.

 

yes but it looks like 1,000's of people have programmed the raw chip without problems and there is nothing i can find on the web about this problem which is weird. It just don't make sense, I am not sure what to think.

Thousands of people ski down expert slopes too, but not on their first day of skiing.

 

Thousands of people ski down expert slopes too, but not on their first day of skiing.

true but you have to start some where also many youtube videos showing people doing the same thing And steps iam doing so i don't know what is going on. so i don't think its was asking to much its not like its "expert" setup/circuirt here. again no where online talks about this problem so must not be a common problem.

 

true but you have to start some where also many youtube videos showing people doing the same thing And steps iam doing so i don't know what is going on. so i don't think its was asking to much its not like its "expert" setup/circuirt here. again no where online talks about this problem so must not be a common problem.

Many people don’t goto their tennis instructor to learn how to ski. Might work for the bunny hill but not black diamond slopes.

 

Welcome to the world of electronics hardware and software, computers, programming, and debugging.

Your situation is not unique. Many times one is faced with multiple problems. For example, let us say that there are three problems happening at the same time. You cannot succeed if only one problem is resolved. Oftentimes, one of the problem is misinformation or a situation that is out of date.

When you finally have all the problems resolved and your system is up and running, you look back and think how "silly" was each problem.

 

Many people don’t goto their tennis instructor to learn how to ski. Might work for the bunny hill but not black diamond slopes.

I don't think me programming a tiny85 would be an "expert" thing to do, it looks straight forward thing to do with all the info that was out there. That's like saying don't walk, you might fall!