Hi,
Not sure if this is the right place to ask, please correct me if i'm wrong
I built a circuit according to the added schematic(also added PCB), it is a soft on/off switch with delay for the off side.
My problem is that the regulator I took - HT7150-3 - doesn't put out 5V as expected. I replaced it with an LM7805 and the circuit worked fine.
I want to know what the problem is before and if I can fix the current situation. Mabye the max current limit of the chip?
PCB(The regulator's Vin is connected to the Vout by intention, and the regulator's output doesn't show 5V):
HT7150-3 datasheet
Thanks,
Omri.
Not sure if this is the right place to ask, please correct me if i'm wrong
I built a circuit according to the added schematic(also added PCB), it is a soft on/off switch with delay for the off side.
My problem is that the regulator I took - HT7150-3 - doesn't put out 5V as expected. I replaced it with an LM7805 and the circuit worked fine.
I want to know what the problem is before and if I can fix the current situation. Mabye the max current limit of the chip?
PCB(The regulator's Vin is connected to the Vout by intention, and the regulator's output doesn't show 5V):
HT7150-3 datasheet
Thanks,
Omri.
Attachments
-
91.7 KB Views: 3