All About Circuits

5S BMS strictly for undervoltage protection?

Search Forums New Posts
M

MisterBill2

Joined Jan 23, 2018
27,659
LikeTheSandwich said:
Oh my gosh. Yeah, you're going to burn up 3.3 ohm. You're going to want a minimum 1K, I like 10K personally. Also yes, I was able to make it work with this setup with 10k resistors, although the small BMS circuits I used required no load at the time I connect the battery. Also be really curious to see that video, I doubt it's actually 3.3 ohms.
Click to expand...
Probably 33K ohms. (Orange, Orange, Orange)
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
R not strictly electronics: yag phosphor for artistic project General Electronics Chat 4
mike__MecE Help with resistor divider for undervoltage overvotage and bidirectional circuit breaker application General Electronics Chat 2
Pressure Plate Are "wired" CCTV/DVR systems strictly end-to-end coax cable only? Can they be RF link compatible? General Electronics Chat 2
Robson Jhon Access ESP8266 and Wireless Temperature Sensor strictly through USB connection for driver setup Microcontrollers 1
J retriggerable monostable 555 circuit with strictly enforced timing Digital Design 7
Similar threads
not strictly electronics: yag phosphor for artistic project
Help with resistor divider for undervoltage overvotage and bidirectional circuit breaker application
Are "wired" CCTV/DVR systems strictly end-to-end coax cable only? Can they be RF link compatible?
Access ESP8266 and Wireless Temperature Sensor strictly through USB connection for driver setup
retriggerable monostable 555 circuit with strictly enforced timing

You May Also Like

Top