Hello.
I am trying to design a power supply to convert [240Vac] (UK Mains) to a dual [12Vdc] and [150Vdc] (130V-160V is acceptable) output.
I have drawn a rough sketch of how it could theoretically work, but the problem is my lack of practical knowledge, picking the correct components to do the job and their availability. in terms of size roughly no larger than 150mm x 150mm x 150mm for the whole design. weight just has to be reasonable.
Could someone give me a hand with the design and chosing the right components that will be safe and durable? or maybe even something already.
The Power supply will be powering a mosfet circuit. I do not imagine more than 2A output being needed for the 150Vdc supply and I do not imagine needing more than 250mA for the 12Vdc supply.
If it is not possible or if it causes a lot of issues to have it as a dual supply I can always have two separate circuits one for the 12Vdc and one for the 150Vdc.
Please any help will be appreciated, especially picking the components etc. someone suggested for me the A41-130-230 or FD8-120
I am trying to design a power supply to convert [240Vac] (UK Mains) to a dual [12Vdc] and [150Vdc] (130V-160V is acceptable) output.
I have drawn a rough sketch of how it could theoretically work, but the problem is my lack of practical knowledge, picking the correct components to do the job and their availability. in terms of size roughly no larger than 150mm x 150mm x 150mm for the whole design. weight just has to be reasonable.
Could someone give me a hand with the design and chosing the right components that will be safe and durable? or maybe even something already.
The Power supply will be powering a mosfet circuit. I do not imagine more than 2A output being needed for the 150Vdc supply and I do not imagine needing more than 250mA for the 12Vdc supply.
If it is not possible or if it causes a lot of issues to have it as a dual supply I can always have two separate circuits one for the 12Vdc and one for the 150Vdc.
Please any help will be appreciated, especially picking the components etc. someone suggested for me the A41-130-230 or FD8-120
Attachments
-
72.1 KB Views: 9