I am building a 2x72 belt grinder and purchased an Iron Horse 2hp AC motor and a vfd. Running 10/3 from the wall to the VFD then 12/4 from vfd to the motor.
I got all this wired up only to find that the 220 receptacle doesn't match the plug I bought. It's an Eaton Universal Angle plug 30/50amp 250v. Is there a different plug that can be wired on or do I need to change the receptacle to 3 wire? Can I wire a 4 prong plug with the 10/3 I already have? Not sure where to go from here.
I got all this wired up only to find that the 220 receptacle doesn't match the plug I bought. It's an Eaton Universal Angle plug 30/50amp 250v. Is there a different plug that can be wired on or do I need to change the receptacle to 3 wire? Can I wire a 4 prong plug with the 10/3 I already have? Not sure where to go from here.
Attachments
-
3.2 MB Views: 8
-
1.9 MB Views: 8
-
5.4 MB Views: 8
-
1.3 MB Views: 8