Hi all,
I'm trying to design the proper schematic for a 1 cell 4A lithium battery charging protection module. It uses a DW01A and two FS8205A in parallel to control more current. A <3A adaptor will be used for it.
Datasheets for both chips are uploaded.
Is my schematic below correct, please?

I'm trying to design the proper schematic for a 1 cell 4A lithium battery charging protection module. It uses a DW01A and two FS8205A in parallel to control more current. A <3A adaptor will be used for it.
Datasheets for both chips are uploaded.
Is my schematic below correct, please?

Attachments
-
869.8 KB Views: 0
-
302.1 KB Views: 0