1.27mm USB Socket Question - Locating Cable

Thread Starter

circuits9

Joined Feb 2, 2020
18
Good morning:
I am wanting to use a Micro-USB USB socket from Amphenol LTW in my design but am unclear what type of connector I need to use for connecting to to the back of the USB plug to the PCB. Based on the drawing, it has 1.27mm spacing. I have the flexibility on the PCB to leverage whatever connector is necessary as I am still in the design phase. Any guidance would be appreciated! Here is some links and pictures:
1580651743765.png
https://www.amphenolltw.com/2012download/2D PDF/04_USB Connectors/NUB-20PMFP-SC7001.pdf
1580651804863.png
 

KeithWalker

Joined Jul 10, 2017
3,063
That connector is designed to be mounted directly on the circuit board. You have posted the circuit board drilling detail (above).
Regards,
Keith
 
Last edited:

Thread Starter

circuits9

Joined Feb 2, 2020
18
Ahh..I see. Ok so I found this one on their site that already has a wire lead. What kind of connector do you think this one?1580656384208.png
 
Top