I need to be able to switch high current (5 - 24vdc) for a very short time, up to 250ms max and as little as about 30-50ms. I suspect current will be 200-600 amps. I would need the chip to be able to handle the current every 10-30 seconds or so, and it won't be used repeatedly for prolonged periods - I suspect needing to do 5-10 bursts over a 5 minute period.
This is the chip I'm looking at:https://www.infineon.com/dgdl/irfp4368pbf.pdf?fileId=5546d462533600a40153562c61512015
I've also attached the PDF of the chip.
If this isn't the right one, can someone suggest somethign that would work? I don't mind running a few of them in parallel if that will work. I plan on controlling the timing with an arduino.
As far as a heat sink, I have some very large CPU heat sinks from server CPU's that should be more than adequate for this setup.
This is the chip I'm looking at:https://www.infineon.com/dgdl/irfp4368pbf.pdf?fileId=5546d462533600a40153562c61512015
I've also attached the PDF of the chip.
If this isn't the right one, can someone suggest somethign that would work? I don't mind running a few of them in parallel if that will work. I plan on controlling the timing with an arduino.
As far as a heat sink, I have some very large CPU heat sinks from server CPU's that should be more than adequate for this setup.
Attachments
-
277.7 KB Views: 11