Wrong.In real life there are tolerances of resistors or other components but in simulator it should gives us what we calculate, right?
You need to learn what is significant, and what is not; in this case, the simulation results and your own calculations are, for all practical purposes, identical. Expecting any better correspondence than that is completely unrealistic.I calculated VO1 as -600 and VO3 as 6.400 but in the simulate it's not
Then the calculation is wrong. You can't get 600V out of an opamp with +-15V supplies .I calculated VO1 as -600
it's mVThen the calculation is wrong. You can't get 600V out of an opamp with +-15V supplies .
by Jake Hertz
by Jake Hertz
by Duane Benson
by Duane Benson