It only says up to 25Vcc but does not say minimum Vcc can be. https://www.diodes.com/assets/Datasheets/ZXGD3005E6.pdf

 

5.0 V is the lowest value mentioned in any of the parameters. If it could run on 3.3 V, I'm pretty sure they'd say it.

ak

 

Looks like you need to contact a Zetex FAE to get that answer.

Most of the characterization data was done at 15V.


Regards, Dana.

 

How about this driver? TC4420EOA http://ww1.microchip.com/downloads/en/DeviceDoc/21419D.pdf

Is this what your looking for?