Hello everyone! I checked datasheets but couldn't seem to find anything about a package type

 

Hello,

What brand and model are you using?
There seem to be many:
https://www.google.com/search?q=2+pin+screw+type+connector+block&tbm=isch&safe=images&chips=q:2+pin+screw+type+connector+block,online_chips:wire:aQ5yxPzr1CU=&hl=nl&sa=X&ved=2ahUKEwjt4-69krv0AhUru6QKHSQAC5IQ4lYoAXoECAEQEw&biw=1432&bih=611
Perhaps there are package details on the website of the manufacturer.

Bertus

 

Hello,

What brand and model are you using?
There seem to be many:
https://www.google.com/search?q=2+pin+screw+type+connector+block&tbm=isch&safe=images&chips=q:2+pin+screw+type+connector+block,online_chips:wire:aQ5yxPzr1CU=&hl=nl&sa=X&ved=2ahUKEwjt4-69krv0AhUru6QKHSQAC5IQ4lYoAXoECAEQEw&biw=1432&bih=611
Perhaps there are package details on the website of the manufacturer.

Bertus

Thank you for getting back to me this is the one I'm using put couldn't see a package type on the datasheet.

 

Hello,

You could make our own using the data from the drawing:

Bertus

 

Hello,

You could make our own using the data from the drawing:
View attachment 253758
Bertus

Alright thanks

 

Hello,

You could make our own using the data from the drawing:
View attachment 253758
Bertus

Is there a general package type for terminal connectors regardless of brand or type?

 

Hello,

Wich drawing program are you using?
Did you look in its library?

Bertus

 

Hello,

Wich drawing program are you using?
Did you look in its library?

Bertus

I'm actually writing a bills of materials for the terminal connector so I just want to put a package type under it or should I leave it as N/A?

 

Is there a general package type for terminal connectors regardless of brand or type?

They also go in current rating capability, those shown are one of the lower rated versions.

 

They also go in current rating capability, those shown are one of the lower rated versions.

Alright thank you but I want to put a package type for it in my bills of materials can I classify it as screw type?

 

PCT (printed circuit), screw terminal,
A common spacing is 2.54mm or 0.1"
The description is in the link you provided., Wire-to-board terminal block

 

PCT (printed circuit), screw terminal,
A common spacing is 2.54mm or 0.1"
The description is in the link you provided., Wire-to-board terminal block

Alright thank you