For MikeML,
V2 = 12 to 220 VDC input
V1 = 12 VDC from 12 Volt power supply
GND is common to input & 12 VDC power supply
Put it together and L1 energizes w/o input.
Problem my be using wrong Mosfet NTE2396.
It is N ch
Not a lot of selection here in Monterey
Thanks
V2 = 12 to 220 VDC input
V1 = 12 VDC from 12 Volt power supply
GND is common to input & 12 VDC power supply
Put it together and L1 energizes w/o input.
Problem my be using wrong Mosfet NTE2396.
It is N ch
Not a lot of selection here in Monterey
Thanks