USB Micro-B identification

Thread Starter

SpikeyMikey

Joined Jan 2, 2023
1
Hi I have a broken USB micro-B female on the PCB board for wireless charger.

My issue is identifying the connector it looks like a 5 pin which I have done before but I'm a bit lost with the connections to each side of the 5 pins. Photo provided.

Any help would be appreciated.20230102_085548.jpg
 

twohats

Joined Oct 28, 2015
447
Is that the original USB connector?
If so, remove it, the number of lands should be obvious.
Good luck...........
 
Top