I am developing a ZETA converter in the InfineonSpiceDE and to switch the MOSFET I was trying to use the IR2117.
But the circuit seems to not work.
Would really appreciate some help regarding this issue.

 

Welcome to AAC!
Period T doesn't seem to have a value defined?

 

Welcome to AAC!
Period T doesn't seem to have a value defined?

Thank you so much for the reply...
I am new to this software and was looking into the example circuit.
They defined every parameters in net names.
I have attached my parameters below.

 

This is the waveform I get after simulation.

 

What is the sim duration?
Your trace only goes to 57milliSec, but your switching period T is 100milliSec (which seems extremely slow).
BTW, you are aware that 'm' denotes milli, not micro?

 

What is the sim duration?
Your trace only goes to 57milliSec, but your switching period T is 100milliSec (which seems extremely slow).
BTW, you are aware that 'm' denotes milli, not micro?

No, actually I gave a zoomed in ss of the waveform to show the output of the driver.
I then changed the T to 100n.
But, is it really a time related problem?
Iike I am getting a pulse in the IN pin of the driver. But in the HO pin, shouldn't I get a similar pulse for driving the MOSFET?