Typos - Insulated Gate FET - Vol 3

Thread Starter

Unregistered

Joined Dec 31, 1969
0
Should this sentence "With no charge on the capacitor, no bias on the gate, the N-type diffusions, the source and gate, remain electrically isolated." not read "With no charge on the capacitor, no bias on the gate, the N-type diffusions, the source and drain, remain electrically isolated."?

2 paragraphs before the first schematic symbol should be "controls" not "controlls".

Paragraph before the first schematic, should be "cross-section" not "across-section".

Derek
 

Dave

Joined Nov 17, 2003
6,969
Hi Derek,

Thanks for taking the time to give us some feedback.

See: http://www.allaboutcircuits.com/vol_3/chpt_2/10.html

Should this sentence "With no charge on the capacitor, no bias on the gate, the N-type diffusions, the source and gate, remain electrically isolated." not read "With no charge on the capacitor, no bias on the gate, the N-type diffusions, the source and drain, remain electrically isolated."?
Yes you are correct. One would hope the source and gate were electrically isolated in all modes of operation!

2 paragraphs before the first schematic symbol should be "controls" not "controlls".
Thanks for the correction.

Paragraph before the first schematic, should be "cross-section" not "across-section".
Thanks for the correction.

Dave
 
Thread starter Similar threads Forum Replies Date
G Feedback and Suggestions 0
S Feedback and Suggestions 1
C Feedback and Suggestions 0
R Feedback and Suggestions 2
jut Feedback and Suggestions 5
Top