I have a separate Alarm System and a separate Strobe Light System; both are activated by Motion sensors. Each System is powered by a 12 VDC battery (total of two batteries) and the batteries are located about 50 feet from one another.
I would like to control both systems (on/off) with one DPST top-hat switch and have attached a wiring diagram that I think will do the job. PLEASE NOTE: all wires to and from the switch are from the negative side of both batteries. My question is: Will this work and not affect the voltage leading to either System.
I should probably mention here that I know just enough about electricity to cause myself bodily harm, but I think this will work.
I would like to control both systems (on/off) with one DPST top-hat switch and have attached a wiring diagram that I think will do the job. PLEASE NOTE: all wires to and from the switch are from the negative side of both batteries. My question is: Will this work and not affect the voltage leading to either System.
I should probably mention here that I know just enough about electricity to cause myself bodily harm, but I think this will work.