Hi Engineers, I have been troubleshooting this 2000watts souer Inverter with the green and red light on without output.
All the mosfets are good and there's no heating up components on the circuit but no output.
Please, any ideas where the problem is?

 

Any photos for the machine?, or the board you fixing?
Can you send the machine manual so we know about machine you fixing?

 

Hi Engineers, I have been troubleshooting this 2000watts souer Inverter with the green and red light on without output.
All the mosfets are good and there's no heating up components on the circuit but no output.
Please, any ideas where the problem is?

I suspect the power switch is at the "power save" position? On the other hand, if you've been in it enough to check the FETS, you probably have already checked that switch .