All About Circuits

Trouble programming 10M02 with .pof (flash)

R

Thread Starter

rocksolidsr

Joined Apr 15, 2009
6
I was wondering if someone could help me with an issue I'm having when trying to program my 10M02DCV36 FPGA. When I program the chip with the .sof file everything is fine. However, when I try and program with the .pof file the process starts and then fails at ~5%.

Below are my JTAG connections

ShaneRock_0-1666886384115.png


Any help would be much appreciated!
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
D Trouble powering a three phases pump with a VFD Power Electronics 9
I T.I. BLE USB MCU Programming Trouble (CC2540) Microcontrollers 0
James Chandler Having trouble compiling my programming code - Eragon 410: EIC-Q410 Programming & Languages 0
A having trouble programming!!! General Electronics Chat 5
C Trouble with simpson's rule in a Programming Assignment Programming & Languages 1
Similar threads
Trouble powering a three phases pump with a VFD
T.I. BLE USB MCU Programming Trouble (CC2540)
Having trouble compiling my programming code - Eragon 410: EIC-Q410
having trouble programming!!!
Trouble with simpson's rule in a Programming Assignment

You May Also Like

Top