HI Guys, I need your help. Recently i bought a treadmill, Its running sometime. Suddenly it stopped. And Shows the error code E6. After i open the Circuit board the fuse has gone. After i replace the fuse . Once i start the Treadmill from Remote , immediately the fuse gone. I try to replace the fuse more then 5 times , every time the fuse is gone. Please help .
1. Is it what i replacing the wring capacity ? How do find the right fuse.
2. Is it any other problem in the circuit?.
3. I tested the MOSFET ? it seems working fine( as per this video
).
Here i uploaded as much as possible all he photos .
Help
Siva
1. Is it what i replacing the wring capacity ? How do find the right fuse.
2. Is it any other problem in the circuit?.
3. I tested the MOSFET ? it seems working fine( as per this video
Here i uploaded as much as possible all he photos .
Help
Siva
Attachments
-
61.8 KB Views: 5
-
127.5 KB Views: 6
-
107.2 KB Views: 6
-
83.1 KB Views: 6
-
115.5 KB Views: 5
-
94 KB Views: 5
-
100.3 KB Views: 6
-
151.1 KB Views: 5
-
144.3 KB Views: 5
-
175 KB Views: 5