I am currently working on my senior project and am having a bit of trouble. Basically, I have a 10 Volt source that needs to be given to a piece of hardware whenever a 3.6 Volt source is activated. I am pretty sure I need to deal with transistors, but don't have much experience with them. Can anyone point me in the right direction, or draw a simple diagram showing how this might work?
Help is appreciated.
+10V
|
|
\/
(switch lets +10V go through to output) <----- +3V
|
|
\/
+10V (after switch turns on)
Help is appreciated.
+10V
|
|
\/
(switch lets +10V go through to output) <----- +3V
|
|
\/
+10V (after switch turns on)