Just to check on secondary Toroidal transformer wiring , I brought another Toroidal withe the following specs ,
80 VA Mains Toroidal Transformer 0-230 V : 2 x 18 V
I have used this one before , but the Power supply PCB had a connector block for all 4 secondary wires (Black,red,orange,yellow) , but this time I need to seperate AC supplies , one for a +15 -15 and ground PSU , and +12 -12 and ground PSU , Both PSU need a AC supply between 12 and 20 v , am I right in assuming it will be red,Black for one circuit and Yellow, Orange for the other , so I will end up with 2 AC outputs , both 18v
80 VA Mains Toroidal Transformer 0-230 V : 2 x 18 V
I have used this one before , but the Power supply PCB had a connector block for all 4 secondary wires (Black,red,orange,yellow) , but this time I need to seperate AC supplies , one for a +15 -15 and ground PSU , and +12 -12 and ground PSU , Both PSU need a AC supply between 12 and 20 v , am I right in assuming it will be red,Black for one circuit and Yellow, Orange for the other , so I will end up with 2 AC outputs , both 18v
Last edited: