hi there everyone im new at this forum so not sure if im in the right place.
i oder a 4pst swtich 8 pins on off and some momentary 3 pins switch. now my projet is to use the on off switch as a main swithc 12 volt to give power to my momentary switch. now i order the wront one i wanted a 12 pins switch so the middle pin have the 12 volt from the battery and then wire exterieur pin to the momentary switch. can i still use the 8 pin if their no pin in the middle of the swtich( there hole like i can add pin to it).
something like this

https://www.google.ca/search?rlz=1C...j0i13i30k1.0.yTXX4EVxLFU#imgrc=0mJDhmMsp5BUWM:

 

Pic didn't come through!
Max.

 

Pic didn't come through!
Max.

i have a hard time to add a picture

https://www.google.ca/search?rlz=1C...j0i13i30k1.0.yTXX4EVxLFU#imgrc=0mJDhmMsp5BUWM:

 

If you mean you want to convert 4 pole single throw, to 4 pole double throw, then no you cannot add a pin.
Max.

 

If you mean you want to convert 4 pole single throw, to 4 pole double throw, then no you cannot add a pin.
Max.

ok so can i wired my 8 pin on (none) off switch to give 12 volts to my monentary switches(2 switches) and a push button and when its off no power to the momentary swtich on push button