tightening torque

Thread Starter

Dhaval Trivedi

Joined Jun 10, 2015
36
I have few question on fasteners design :



1. How to select the right thread size for particular joint.

2. How to know the tension in the particular joint. Also type and direction of forces/loan on the joint.

3. How to know the minimum no of thread engagement required in the joint.

4. How to know the thread engagement requirement into the joint.

5. How to calculate the tightening torque. Also the Clamping load and Preload.
 

GopherT

Joined Nov 23, 2012
8,012
I have few question on fasteners design :



1. How to select the right thread size for particular joint.

2. How to know the tension in the particular joint. Also type and direction of forces/loan on the joint.

3. How to know the minimum no of thread engagement required in the joint.

4. How to know the thread engagement requirement into the joint.

5. How to calculate the tightening torque. Also the Clamping load and Preload.
Those are very good questions for a mechanical engineering site.
 
Top