Ok I made this to test out how to make a single supply that has vertical ground.
This is what I have the transformer with to caps and a small load.
the output is 19 volts across the caps. From the negative side to ground I get little over 11 volts.
The positive side to ground I get 8 volts I guess the caps are not that close in value.
I then added 2 regulators 7905 and 7805 the 7805 has no output. Im thinking the caps
not good. R1 is not hooked too the ground it's 10 k
This is what I have the transformer with to caps and a small load.
the output is 19 volts across the caps. From the negative side to ground I get little over 11 volts.
The positive side to ground I get 8 volts I guess the caps are not that close in value.
I then added 2 regulators 7905 and 7805 the 7805 has no output. Im thinking the caps
not good. R1 is not hooked too the ground it's 10 k